esp8266 freeRTOS eclipse template

ChrisK
Posts: 1
Joined: Mon May 15, 2017 6:23 am

esp8266 freeRTOS eclipse template

Postby ChrisK » Thu Aug 17, 2017 8:32 pm

Is there any eclipse template for esp8266 freeRTOS?
I am compiling sdk freertos modified example and I am always getting reset whet a devive connected to my esp8266 board.

Here are some captured messages from esp

add 1
aid 1
station: a0:32:99:61:8c:36 join, AID = 1
Fatal exception (3):
epc1=0x40107220
epc2=0x00000000
epc3=0x401027ea
epcvaddr=0x40259ea0
depc=0x00000000
rtn_add=0x40227208
ϊ
ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 29944, room 16
tail 8
chksum 0x3b
load 0x3ffe8000, len 940, room 0
tail 12
chksum 0xff
ho 0 tail 12 room 4
load 0x3ffe83b0, len 1064, room 12
tail 12
chksum 0x83
csum 0x83
~Ϋl μd›b Œžbίδ ‚ŒbδΔbγ‰’‡ί œάlbΐδ8~’nΰnά’œΔ lΫϋΑnΐˆ‚ Œ ‚ŒŽ l’Œ’lμ Žΰl`ό€nόΔΞΡ•Νсr•έ½µΑ¥±•Ήrj¤Τλ‹V$'H®ΛW(*JMY,–§“–§¦M§MN&LJC…²hcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)
add if1
bcn 100
test line 109test line 115test line 126test line 135test line 139test line 149test line 155test line 157test line 160add 1
aid 1
station: a0:32:99:61:8c:36 join, AID = 1
Fatal exception (3):
epc1=0x40107220
epc2=0x00000000
epc3=0x401027ea
epcvaddr=0x40259ea0
depc=0x00000000
rtn_add=0x40227208
ϊ
ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 29944, room 16
tail 8
chksum 0x3b
load 0x3ffe8000, len 940, room 0
tail 12
chksum 0xff
ho 0 tail 12 room 4
load 0x3ffe83b0, len 1064, room 12
tail 12
chksum 0x83
csum 0x83


Any ideas?

Who is online

Users browsing this forum: No registered users and 6 guests