Re: newbie problem while updating AT

2015-10-09T15:34:29+08:00

Hi,

You are not using our official AT firmware.

Please have a try with our official AT firmware : http://bbs.espressif.com/viewtopic.php?f=46&t=1123

If your problem is still unsolved, please provide the capture picture of Flash download tool while downloading.

Statistics: Posted by ESP_Faye — Fri Oct 09, 2015 3:34 pm

newbie problem while updating AT

2015-09-28T21:06:54+08:00

Hi all,
beeing a keen ESP beginner I run into a problem trying to update. Here is the terminal session protocol:
----snip--------
AT+CWMODE=3

OK
AT+RST

OK
WIFI DISCONNECT

ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 1396, room 16
tail 4
chksum 0x89
load 0x3ffe8000, len 776, room 4
tail 4
chksum 0xe8
load 0x3ffe8308, len 540, room 4
tail 8
chksum 0xc0
csum 0xc0

2nd boot version : 1.4(b1)
SPI Speed : 40MHz
SPI Mode : QIO
SPI Flash Size & Map: 8Mbit(512KB+512KB)
jump to run user1 @ 1000

ŒÂÕMEM CHECK FAIL!!! <----------???????????????
ärlŽ‚rô
Ai-Thinker Technology Co. Ltd.

ready
WIFI CONNECTED
WIFI GOT IP
AT+CWJAP?

+CWJAP:"worldgate","00:18:39:5b:2a:35",2,-59

OK
AT+CIFSR <----------ok!!!!!!!!!!!!!!

+CIFSR:APIP,"192.168.4.1"
+CIFSR:APMAC,"1a:fe:34:f5:3d:8e"
+CIFSR:STAIP,"192.168.1.104"
+CIFSR:STAMAC,"18:fe:34:f5:3d:8e"

OK
AT+CIUPDATE

+CIPUPDATE:1
+CIPUPDATE:2
+CIPUPDATE:3

ERROR

ERRORAT
-----snap------
What's my fault? How can I do better?

Beside this I'm looking for an AT extension to get time information from NTP protocol - as my ESP is already connected to the internet
I have to say I am on a WIN10 system so LINUX solutions aren't help
Thank you!

Statistics: Posted by MHz — Mon Sep 28, 2015 9:06 pm

ESP8266 Developer Zone

Re: newbie problem while updating AT

newbie problem while updating AT