I was trying to compile the webserver included in the sample directory of the official repo, but an error doesn't allow me to go on with it.
I'm using Ubuntu 14.04.2, and the xtensa toolchain has been correctly installed.
Thanks for the support!
Code:
alle@alleUbuntu:~/ESP8266_RTOS_SDK/examples/websocket_demo$ ./gen_misc.sh
gen_misc.sh version 20150911
SDK_PATH:
/home/alle/ESP8266_RTOS_SDK
BIN_PATH:
/home/alle/ESP8266_BIN
Please check SDK_PATH & BIN_PATH, enter (Y/y) to continue:
y
Please follow below steps(1-5) to generate specific bin(s):
STEP 1: use boot_v1.2+ by default
boot mode: new
STEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)
enter (0/1/2, default 0):
0
ignore boot
generate bin: eagle.flash.bin+eagle.irom0text.bin
STEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)
enter (0/1/2/3, default 2):
2
spi speed: 40 MHz
STEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)
enter (0/1/2/3, default 0):
0
spi mode: QIO
STEP 5: choose spi size and map
0= 512KB( 256KB+ 256KB)
2=1024KB( 512KB+ 512KB)
3=2048KB( 512KB+ 512KB)
4=4096KB( 512KB+ 512KB)
5=2048KB(1024KB+1024KB)
6=4096KB(1024KB+1024KB)
enter (0/2/3/4/5/6, default 0):
0
spi size: 512KB
spi ota map: 256KB + 256KB
start...
make -C user clean; make -C websocket clean;
make[1]: ingresso nella directory "/home/alle/ESP8266_RTOS_SDK/examples/websocket_demo/user"
rm -f -r .output/eagle/debug
make[1]: uscita dalla directory "/home/alle/ESP8266_RTOS_SDK/examples/websocket_demo/user"
make[1]: ingresso nella directory "/home/alle/ESP8266_RTOS_SDK/examples/websocket_demo/websocket"
rm -f -r .output/eagle/debug
make[1]: uscita dalla directory "/home/alle/ESP8266_RTOS_SDK/examples/websocket_demo/websocket"
rm -f -r .output/eagle/debug
make[1]: ingresso nella directory "/home/alle/ESP8266_RTOS_SDK/examples/websocket_demo/user"
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -I include -I ./ -I ../include -I /home/alle/ESP8266_RTOS_SDK/include -I /home/alle/ESP8266_RTOS_SDK/extra_include -I /home/alle/ESP8266_RTOS_SDK/include/espressif -I /home/alle/ESP8266_RTOS_SDK/include/lwip -I /home/alle/ESP8266_RTOS_SDK/include/lwip/ipv4 -I /home/alle/ESP8266_RTOS_SDK/include/lwip/ipv6 -I /home/alle/ESP8266_RTOS_SDK/include/nopoll -I /home/alle/ESP8266_RTOS_SDK/include/spiffs -I /home/alle/ESP8266_RTOS_SDK/include/ssl -I /home/alle/ESP8266_RTOS_SDK/include/json user_main.c
/bin/sh: 2: xtensa-lx106-elf-gcc: not found
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -I include -I ./ -I ../include -I /home/alle/ESP8266_RTOS_SDK/include -I /home/alle/ESP8266_RTOS_SDK/extra_include -I /home/alle/ESP8266_RTOS_SDK/include/espressif -I /home/alle/ESP8266_RTOS_SDK/include/lwip -I /home/alle/ESP8266_RTOS_SDK/include/lwip/ipv4 -I /home/alle/ESP8266_RTOS_SDK/include/lwip/ipv6 -I /home/alle/ESP8266_RTOS_SDK/include/nopoll -I /home/alle/ESP8266_RTOS_SDK/include/spiffs -I /home/alle/ESP8266_RTOS_SDK/include/ssl -I /home/alle/ESP8266_RTOS_SDK/include/json -o .output/eagle/debug/obj/user_main.o -c user_main.c
make[1]: xtensa-lx106-elf-gcc: comando non trovato
make[1]: *** [.output/eagle/debug/obj/user_main.o] Errore 127
make[1]: uscita dalla directory "/home/alle/ESP8266_RTOS_SDK/examples/websocket_demo/user"
make: *** [.subdirs] Errore 2Statistics: Posted by JackTech — Sat Apr 09, 2016 7:56 pm
]]>