ESP8266 Developer Zone The Official ESP8266 Forum 2016-10-23T13:29:38+08:00 https://bbs.espressif.com:443/feed.php?f=7&t=2911 2016-10-23T13:29:38+08:00 2016-10-23T13:29:38+08:00 https://bbs.espressif.com:443/viewtopic.php?t=2911&p=10236#p10236 <![CDATA[flashing 512KB modules with boot_v1.5.bin fails]]> Here is what happens (this was flashed using the esp flash download tool v2,3). On the first boot after flashing the bootloader and blank.bin at 0x7e000 as well as 0x3e000 the bootloader outputs:


Code:

 ets Jan  8 2013,rst cause:2, boot mode:(3,7)

load 0x40100000, len 1856, room 16
tail 0
chksum 0x63
load 0x3ffe8000, len 776, room 8
tail 0
chksum 0x02
load 0x3ffe8310, len 552, room 8
tail 0
chksum 0x79
csum 0x79

2nd boot version : 1.5
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size & Map: 4Mbit(256KB+256KB)
jump to run user1 @ 1000

error magic!
first boot failed, reboot to try backup bin


 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x40100000, len 1856, room 16
tail 0
chksum 0x63
load 0x3ffe8000, len 776, room 8
tail 0
chksum 0x02
load 0x3ffe8310, len 552, room 8
tail 0
chksum 0x79
csum 0x79

2nd boot version : 1.5
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size & Map: 4Mbit(256KB+256KB)
jump to run user2 @ 41000

error magic!
backup boot failed.

user code done


I then reset the esp8266 and here is what happens:

Code:

 ets Jan  8 2013,rst cause:2, boot mode:(3,7)

load 0x40100000, len 1856, room 16
tail 0
chksum 0x63
load 0x3ffe8000, len 776, room 8
tail 0
chksum 0x02
load 0x3ffe8310, len 552, room 8
tail 0
chksum 0x79
csum 0x79

2nd boot version : 1.5
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size & Map: 4Mbit(256KB+256KB)
jump to run user2 @ 41000

error magic!
backup boot failed.

user code done


At this point the bootloader will never again try user1 @0x1000. All this works fine with earlier bootloaders (pre 1.5). It also fails with 1.6.

Statistics: Posted by tvoneicken — Sun Oct 23, 2016 1:29 pm

]]>