AT+CWSMARTSTART not working

esp03madness
Posts: 8
Joined: Tue Nov 24, 2015 11:42 am

AT+CWSMARTSTART not working

Postby esp03madness » Tue Nov 24, 2015 11:47 am

Hi, I am trying to get smartconfig working on an ESP-03. I've built the latest android app from the github repository. I am using AT 0.50 (sdk 1.4.0).

When I do AT+CWSMARTSTART (already in station mode), and then use the app all I see in the debug UART is:

Code: Select all

smartconfig type:ESPTOUCH

It never goes any further.

However, if I build the SmartConfig example (sdk 1.4.0) then everything works as expected.
What can be the problem?

ESP_Faye
Posts: 1646
Joined: Mon Oct 27, 2014 11:08 am

Re: AT+CWSMARTSTART not working

Postby ESP_Faye » Thu Nov 26, 2015 1:46 pm

Hi,

Please use Espressif official Flash download tool to burn the bin files into Flash.

If your problem is still unsolved, please provide the captured picture of Espressif Flash download tool while downloading.

Thanks for your interest in ESP8266 !

esp03madness
Posts: 8
Joined: Tue Nov 24, 2015 11:42 am

Re: AT+CWSMARTSTART not working

Postby esp03madness » Thu Nov 26, 2015 5:26 pm

Thank you so much! That totally worked.

What does the "ESP FLASH DOWNLOAD TOOL" do differently than "esptool.py"? Does it have something to do with the RF parameters?

milesstone
Posts: 47
Joined: Mon Apr 26, 2021 4:50 pm

Re: AT+CWSMARTSTART not working

Postby milesstone » Sun Oct 03, 2021 7:56 pm

esp03madness wrote:Hi, I am trying to get smartconfig working on an ESP-03. I've built the latest android app from the github repository. I am using AT 0.50 (sdk 1.4.0).

When I do AT+CWSMARTSTART (already in station mode), and then use the ogwhatsapp app all I see in the debug UART is:

Code: Select all

smartconfig type:ESPTOUCH

It never goes any further.

However, if I build the SmartConfig example (sdk 1.4.0) then everything works as expected.
What can be the problem?

It works for me, this is how I do it:

AT+RESTORE
OK
*all the restore + restart info*

AT+CWMODE=1

OK

AT+CWSTARTSMART
OK

*Then I open the android app and select add devices, check the wifi settings and press accept*
smartconfig type:ESPTOUCH
Smart get wifi info
ssid:MYSSID
password:mypassoword
WIFI DISCONNECT
WIFI CONNECTED
WIFI GOT IP
smartconfig connected wifi

AT+CWSTOPSMART
OK


I'm using this at firmware:

AT version:0.50.0.0(Oct 22 2015 11:56:11)
SDK version:1.4.0
compile time:Oct 26 2015 17:33:17

And an android apk built a few minutes ago.

Who is online

Users browsing this forum: No registered users and 3 guests