single AT BIN file ..

[rudi]

Rudi,
my previous message say that i use the 0.9.3 Flash download tool now !
my module is ESP8266-02

hi sorry - my ticket software has not update your 2 edits message in same post.
ok i read now - you use 0.9.3 tool - ok

modul 02 ist the red modul with u-fl adapter and windbond flash

i will answere short time again ( with new post - not edit )
will have a look in my develop suite
..

[rudi]

here it is the way i produce a single BIN file :
boot_v1.3(b3).bin 0x0
user1.512.new.bin 0x1000
blank.bin 0x7E000

all files coming from esp_iot_sdk_v0.9.6_b1 folders (bin and at folders)
did i do something wrong please ??

regards

please read readme.txt


boot_v1.3(b3).bin 0x0

you post
user1.512.new.bin 0x1000

right will be
user1.512.new.bin 0x01000

you post
blank.bin 0x7E000

right will be
blank.bin 0x7E000 & 0x3e000

please read readme.txt message carefuly

have a new try and post your problems or solved

best wishes

rudi

[rudi]

the "MEM CHECK FAIL!!!" problem has been resolved in esp_iot_sdk_v0.9.6_b1 http://bbs.espressif.com/viewtopic.php?f=7&t=205
!

hi faye,
"Mem CHECK FAIL" message comes after boot, see boot message

i post wdt message after a AT+RST too - see RST message

best wishes
rudi

[ESP_Faye]

Hi, rudi,

sdk0.9.5 have this "MEM CHECK FAIL!!!" problem, but esp_iot_sdk_v0.9.6_b1 has resolved it http://bbs.espressif.com/viewtopic.php?f=7&t=205

what's the return value of AT+GMR ?

[phil31]

Hi Faye,

please read all my traces !

AT022b1 with SDK 0.9.6 generate this problem !

i wil try later to add blank.bin @ 0x3e000 to see if that change something .. but i doubt !


regards

[rudi]

Hi, rudi,

sdk0.9.5 have this "MEM CHECK FAIL!!!" problem, but esp_iot_sdk_v0.9.6_b1 has resolved it http://bbs.espressif.com/viewtopic.php?f=7&t=205

what's the return value of AT+GMR ?

hi faye
thanks for your effort,

for all clear
i download today again
esp_iot_sdk_v0.9.6_b1
viewtopic.php?f=7&t=205

i take esp flash download tool 0.9.3.1

fill out
blank.bin to 0x3e000
blank.bin to 0x7e000
boot_v1,3(b3).bin to 0x00000
user1.512.new.bin to 0x01000

flash it and boot the modul
have a look to the picture

thank you and best wishes
rudi

[rudi]

hi faye,

please see my post
viewtopic.php?f=7&t=205&p=875#p875

think, perhabs can be solved the problem

best wishes!

rudi