Connect site with SSL

Good Day
Posts: 2
Joined: Thu Apr 01, 2021 3:02 pm

Connect site with SSL

Postby Good Day » Thu Apr 01, 2021 3:34 pm

Dear all,

I know that SSL connection problem with AT command can be found in this BBS.

And I already refer "" but it doesn't helpful.

I used ESP-WROOM-02D and please check below firmware information.

AT version: 19 2020 18:15:04)
SDK version:3.0.3(8427744)
compile time:Mar 24 2020 16:16:12
Bin version(Wroom 02):3.0.3

In my board, with below AT command sequences,

> AT+CIPSTART="SSL","site's URL",443

"" can be connected but "" can not be connected.

How I can check and solve problem?
Do there need more AT commands?

I want to check my own web server, but I think "" has same problem.
So I asked about "" first.


Good Day
Posts: 2
Joined: Thu Apr 01, 2021 3:02 pm

Re: Connect site with SSL

Postby Good Day » Fri Apr 09, 2021 6:23 pm

After connect "" with SSL mode, I asked GET messages like below.

"GET /index.html HTTP/1.1 Host:"

And I can see below message.

"HTTP/1.1 301 Moved Permanently
Content-Type: text/html; charset=UTF-8"

I'm not sure, I connect google with HTTPs or not.

And there are descriptions for "+CIPSSLCCONF".
Am I set it with esp_ca_cert.bin and esp_cert_private_key.bin?

Thans in advance.

Her Mary
Posts: 480
Joined: Mon Oct 27, 2014 11:09 am

Re: Connect site with SSL

Postby Her Mary » Mon Apr 12, 2021 11:34 am

If you set it as

Code: Select all

then it should be SSL connection. Or maybe you can try to capture Wi-Fi packets to make sure of it.
And some SSL server may need certificates to connect to it, but is not one of them.

Who is online

Users browsing this forum: No registered users and 2 guests