Wrong SPI Flash Size

[karawin]

Hi
I generated user1.4096.new.6.bin and user2.4096.new.6.bin with
make BOOT=new APP=1 SPI_SPEED=40 SPI_MODE=QIO SPI_SIZE_MAP_6
make BOOT=new APP=2 SPI_SPEED=40 SPI_MODE=QIO SPI_SIZE_MAP_6
with RTOS sdk 1.4

But when booting i see:
2nd boot version : 1.5
SPI Speed : 40MHz
SPI Mode : QIO
SPI Flash Size & Map: 32Mbit(512KB+512KB)

I flashed also blank.bin and esp_init_data_default.bin
but i am unable to have the flash size in 1024+1024
This is a problem for user2 generated at 0x101000 because system_get_flash_size_map() return a value of 4 not 6 and the ota fails in the flash erase..

What is wrong?
Thanks

[ESP_Greg]

Hi,
Do you still have this issue? Seems like some operation incorrect.

[karawin]

Yes still the same. And the third byte is 0x60, it is good.
But I give up and use the 4 now and it works for the ota. (4MB 512+512)
See https://github.com/karawin/Ka-Radio

Thanks.

[ESP_Greg]

I never saw this before..... Sorry

[Altero]

Hello,
has this issue been resolved ? I am having the same problem.

Thanks

[ESP_Faye]

Hi,

While download the firmware into flash, you need to select the corresponding flash map on the ESP Flash Download Tool.

Thanks for your interest in the ESP8266!