New FEATURES gathering

[rudi]

on-die temp 'eratur' sensor

best wishes rudi

[rudi]

hi espressif team

only a thinking about AES.
perhabs this will be nice future

likewise!..

loop AES
http://sourceforge.net/projects/loop-aes/
http://loop-aes.sourceforge.net/aespipe/

others: ( arduino ect )
https://github.com/qistoph/ArduinoAES256
http://www.literatecode.com/aes256

AES256 base function ( s-box? )

or/and

AES256 base function <-> prime / second spi s-box

best wishes
rudi

[Lars R.]

Hey Guys， is there any special feature that would help a lot in your application?
Please , post your idea and suggestion here and the espressif guys will take them into consideration when designing the much more powerful soc-chip of the next generation.

+Pinout of package
. LNA on corner pin
. Power-pins on corner pins
. Power pins more together if possible (e.g. VDDA)
. IO-pins more together (e.g. CHIP_EN near OSC pins)
. OSC on corner pins (maintaining distance to power pins)
. RES12K on package, if possible
+Minimized wiring requirements for boot sequence; bootloader example:
. try UART boot with flash option; if fails -> try SPI flash boot; if fails -> try SDIO boot
+A second 4-bit SPI.
+Minimized library dependencies (source code of opensource projects)

Bigger changes:
+Bootloader on user-programmable FLASH (on-die/on-package)
+MBits of Flash on package
+Opensource microprocessor IP

Regards
Lars

[costaud]

Wow!! Thanks a lot for your kind attention!!

[guan]

I would like a timer/counter like the one you would find in a modern microcontroller. It would have a prescaler, can count from both internal clock and an external pin or interrupt (so I could use it for quadrature decoding, for example), usable for PWM output, trigger interrupts on overflow and compare (with multiple compare registers), and maybe trigger DMA if you implement that for other peripherals such as SPI or I2C.

[muris]

I would also like to point out to "Trigger interrupts" - these are very important!

[costaud]

Roger that !

[guan]

Pinout for the SPI flash (on the right-hand side of the chip) to match the standard pinout of SPI flash chips.

[vowstar]

Sniffer mode in 802.11n

[guan]

Bootloader output should be 115200 baud (or something standard like 9600) instead of 75000 baud.