I try to migrate from SDK-NONOS 1.5.1 to 2.0.0.
I successfully compiled the IOT-Demo.
I flashed the following files to flash (512kb):
0x00000: eagle.flash.bin
0x10000: eagle.irom0text.bin
0x7C000: esp_init_data_default.bin
0x7E000: blank.bin
Before that on the module flash was SDK 1.5.1.
I had no problems with SoftAP.
But with 2.0.0 the SoftAP is shown only sometimes in my smartphone or windows WiFi list.
If I try to connect to the SoftAP, the UART puts something like that:
Code: Select all
ets Jan 8 2013,rst cause:1, boot mode:(3,6)
load 0x40100000, len 28444, room 16
tail 12
chksum 0xd0
ho 0 tail 12 room 4
load 0x3ffe8000, len 2864, room 12
tail 4
chksum 0x32
load 0x3ffe8b30, len 3488, room 4
tail 12
chksum 0xab
csum 0xab
rf cal sector: 123
rf[112] : 00
rf[113] : 00
rf[114] : 01
SDK ver: 2.0.0(5a875ba) compiled @ Aug 9 2016 15:12:27
phy ver: 1055, pp ver: 10.2
SDK version:2.0.0(5a875ba)
IOT VERSION = v1.0.5t23701(a)
reset reason: 0
mode : sta(18:fe:34:9b:86:e5) + softAP(1a:fe:34:9b:86:e5)
add if0
add if1
dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1)
bcn 100
max connection!
max connection!
add 1
aid 1
station: 00:0f:c9:0a:e2:20 join, AID = 1
err already associed!
station: 00:0f:c9:0a:e2:20 leave, AID = 1
rm 1
max connection!
max connection!
max connection!
max connection!
max connection!
max connection!
max connection!
max connection!
max connection!
max connection!
add 1
aid 1
station: 00:0f:c9:0a:e2:20 join, AID = 1
err already associed!
station: 00:0f:c9:0a:e2:20 leave, AID = 1
rm 1
max connection!
max connection!What is wrong?
Thank you and best regards!