airkiss

maike
Posts: 9
Joined: Wed Jun 29, 2016 6:29 pm

airkiss

Postby maike » Thu Feb 16, 2017 2:57 pm

您好,管理员
我请问一下关于airkiss的配置问题,你们那边是否有测试过Iphone7 的微信airkiss配置能否正常配置的呢?我这边配置不上
有这样的输出
f r-1, scandone
f r-1, scandone
reconnect
f r-1, SC version: V2.5.3
scandone
f r-1, scandone
f r-1, scandone

TYPE: AIRKISS

F|sniffer on ch:6
F|rssi:-30, ch:6
F|head:82

F|all data:23, Index:6, retain:3

F|SCAN SSID: iKECINSmart
F|SCAN CRC SSID:1

F|pswd:11, index:3, 7
free heap size:36080
smartconfig restart
SC version: V2.5.3
f r-1, scandone
err, scan status 1
del if0
usl
sul 0 0
f r-1, Fatal exception (28):
epc1=0x4000df2f
epc2=0x00000000
epc3=0x4022bd18
epcvaddr=0x0000007f
depc=0x00000000

但是基本上都是停留在

TYPE: AIRKISS

F|sniffer on ch:6
F|rssi:-30, ch:6
F|head:82
就不动了

我试过iphone 6 是可以的。而且很快能配置上
请问一下这个应该是什么问题呢?

ESP_Xutao
Posts: 134
Joined: Tue Sep 27, 2016 5:42 pm

Re: airkiss

Postby ESP_Xutao » Fri Feb 17, 2017 12:13 pm

你好:
我们这Iphone7测试Airkiss是可以的。IOS10.2.1

Code: Select all

2nd boot version : 1.6
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size & Map: 16Mbit(512KB+512KB)
jump to run user1 @ 1000

rf cal sector: 507
rf[112] : 00
rf[113] : 00
rf[114] : 01

SDK ver: 2.0.0(41f3149) compiled @ Nov 17 2016 13:08:45
phy ver: 1055, pp ver: 10.2

SDK version:2.0.0(41f3149)
SC version: V2.5.4
mode : sta(18:fe:34:ce:22:cc)
add if0
scandone
scandone
scandone
SC_STATUS_FIND_CHANNEL
TYPE: AIRKISS
T|PHONE MAC: cc 08 8d 97 d3 f1
T|AP MAC   : 20 76 93 27 91 7c
SC_STATUS_GETTING_SSID_PSWD
SC_TYPE:SC_TYPE_AIRKISS
T|pswd : 12345678
T|ssid : newwifi-test
SC_STATUS_LINK
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 4
cnt

connected with newwifi-test, channel 13
dhcp client start...
ip:192.168.99.160,mask:255.255.255.0,gw:192.168.99.1
SC_STATUS_LINK_OVER
Finish send notify!
Finish send notify!
Finish send notify!
Finish send notify!
Finish send notify!
Finish send notify!
pm open,type:2 0
Finish send notify!
Finish send notify!

请确定固件!

maike
Posts: 9
Joined: Wed Jun 29, 2016 6:29 pm

Re: airkiss

Postby maike » Sat Feb 25, 2017 2:48 pm

嗯,我升级了smartcfg版本就可以了,从2.5.3.升级到2.5.4就可以了,谢谢哈
顺便请问一下,有提供C语言版本的一键配置发送端的源码吗?(ESPTOUCH的,airkiss估计没有?),我在github上只找到了安卓和IOS的demo

Who is online

Users browsing this forum: Bryantpoirm, HenryCot, Henryionic and 10 guests