AT+CIPSTARTSSL Command

[Turconi]

Hi everybody:

I have work over the version at_v0.20 and I added this command to get access to smtp with ssl .. like gmail security...
you must use like the AT+CIPSTART but only accept the ip address directly (smtp of gmail = 64.233.186.108 ), not the name of smtp like smtp.gmail.com ....
the port you have to use is as you want... (smtp gmail port = 465)....

With this you have a security connection with ssl ....
I attached this binary ...if someone need the source please say it..

thanks for all effort ..

Asimov

[younger]

Hi everybody:

I have work over the version at_v0.20 and I added this command to get access to smtp with ssl .. like gmail security...
you must use like the AT+CIPSTART but only accept the ip address directly (smtp of gmail = 64.233.186.108 ), not the name of smtp like smtp.gmail.com ....
the port you have to use is as you want... (smtp gmail port = 465)....

With this you have a security connection with ssl ....
I attached this binary ...if someone need the source please say it..

thanks for all effort ..

Asimov

Hi, could you provide the src for these?

I need it very much,thanks!

[Turconi]

I attach the source file... only the AT projects ... on one rar file...

Enjoy.. Asimov

[costaud]

I attach the source file... only the AT projects ... on one rar file...

Enjoy.. Asimov

Good job! Thanks a lot!

[pmanguare]

Hello Asimov,

As I am not an experienced user or programmer of ESP8266, I would like to ask you some questions to check if I did everything well, because so far I could not connect to the Gmail SSL server.
- When I download your firmware to the module, at the same time I should also download the files esp_init_data_default.bin at address 0xfc000, blank.bin at 0xfe000 and user1.1024.new.2.bin at 0x1000 or that is not necessary. ?
- If so, could they be of any version or need to be of a particular version?
- Could you post some examples of an AT commands sequence for a successful SSL connection?

Thank you for your post and I would appreciate your help on this,

Jose.