The esp8266 boards are close to each other so signal strength should not be an issue.
1] I am getting a large number of udp packets that are not being transmitted(90%). I am sending a packet every 300mS.
This is verified by what is received by the second esp8266 and also via a monitoring app on an ipad.
2) I do not get a call back when the packets are sent despite registering the callback. The receive callback does function.
Please can you advise if this is a bug in the RTOS firmware that I am using.
If not, can you advise how to debug this.
I have included the printout from the bootup sequence which shows the firmware and hardware versions.
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x40100000, len 30460, room 16
ho 0 tail 12 room 4
load 0x3ffe8000, len 1976, room 12
ho 0 tail 12 room 4
load 0x3ffe87b8, len 2028, room 12
OS SDK ver: 2.0.0(5d55574) compiled @ Oct 22 2019 16:02:05
phy ver: 1056_9, pp ver: 10.7
rf cal sector: 1019
idle_task_hdl : 40107b38,prio:0, stack:384
tim_task_hdl : 40107c80, prio:2,stack:512
data : 0x3ffe8000 ~ 0x3ffe87b6, len: 1974
rodata: 0x3ffe87b8 ~ 0x3ffe8fa4, len: 2028
bss : 0x3ffe8fa8 ~ 0x3ffefa10, len: 27240
heap : 0x3ffefa10 ~ 0x40000000, len: 67056
====Free heap size:70200
wifi station disconnect ...... fail 0
ssid = TIMING_AP
IP Address: 192.168.5.1
Subnet mask: 255.255.255.0
mode : softAP(de:4f:22:18:10:63)
dhcp server start:(ip:192.168.5.1,mask:255.255.255.0,gw:192.168.5.1)
station: 18:fe:34:da:80:b7 join, AID = 1
Station: 18:fe:34:da:80:b7 join, AID = 1, 255
2. Maybe you can try with the latest version of RTOS. https://github.com/espressif/ESP8266_RT ... ls/sockets
Who is online
Users browsing this forum: No registered users and 0 guests
Newbies Start Here
Are you new to ESP8266?
Unsure what to do?
Dunno where to start?
Start right here!
We also have a RTOS version and a MESH version too!
Complete listing of the official ESP8266 related documentation release by ESPRESSIF!
Must read here!