ESP8266 Developer Zone

Re: FCC sample code missing

2018-01-18T13:58:02+08:00

For anyone wondering, the answer was "no". I am assuming this is due to a licensing agreement somewhere up the chain.

I have written a wrapper around their firmware. However it appears that the firmware uses a predefined init_data_default sector, which is problematic since they have updated init_data_default.bin to "v08" which contains slightly lowered Tx power levels. And the examples all use "0" as the 3rd parameter which I am assuming means "default". But what is the default? I believe it is the old v05. So then we should all be using param3 == 4 ?'

Come on guys. I know the ESP32 is your primary focus right now, but this kind of stuff only takes a few minutes to update..

Statistics: Posted by someburner — Thu Jan 18, 2018 1:58 pm

Re: FCC sample code missing

2018-01-10T18:09:39+08:00

Thanks for the tip! I'll give that try.

Statistics: Posted by someburner — Wed Jan 10, 2018 6:09 pm

Re: FCC sample code missing

2018-01-10T17:13:21+08:00

Ohh, I understand that. That's a problem then.
You should see what the support team tells you, they respond better if you contact via the Fb page.
Otherwise you have to write your own firmware there.

Statistics: Posted by iot-bits.com — Wed Jan 10, 2018 5:13 pm

Re: FCC sample code missing

2018-01-10T16:16:17+08:00

The co-located esp is the controller of the 2nd radio. So compiled form means we cant control it unless we re-flash the esp while the power is still on. This is what we did for pre-testing but it's a pain in the ass and lab time ins't cheap.

Statistics: Posted by someburner — Wed Jan 10, 2018 4:16 pm

Re: FCC sample code missing

2018-01-08T17:57:47+08:00

What about this? Might help.
http://espressif.com/sites/default/file ... 170803.zip

Statistics: Posted by iot-bits.com — Mon Jan 08, 2018 5:57 pm

FCC sample code missing

2018-01-07T09:14:44+08:00

On your main website, there appears to be a place for FCC sample code, but is missing.

http://espressif.com/en/support/explore ... ?keys=Test

Where is this? Can I obtain it for myself via private correspondance? We are about to beging compliance testing and I would like to not have to re-write this all myself. And yes, we do need to do this because we have a 2nd radio co-located next to the ESP. So modular cert does not cover this.

Statistics: Posted by someburner — Sun Jan 07, 2018 9:14 am