Continuous Reset after associating to AP.

[lottoria]

Hi all,

I only used a few commands but it automatically resets.
Could you help me to avoid this issue?
Commands are used below

AT+CWMODE=1

OK
AT+CWJAP="IOT_TEST","22222222"

OK
AT+CIFSR
+CIFSR:STAIP,"192.168.20.116
+CIFSR:STAMAC,"18:fe:34:f4:5e:d5"

OK

ets Jan 8 2013,rst cause:4, boot mode:(3,6)

wdt reset
load 0x40100000, len 816, room 16
tail 0
chksum 0x8d
load 0x3ffe8000, len 788, room 8
tail 12
chksum 0xcf
ho 0 tail 12 room 4
load 0x3ffe8314, len 288, room 12
tail 4
chksum 0xcf
csum 0xcf

2nd boot version : 1.2
SPI Speed : 40MHz
SPI Mode : QIO
SPI Flash Size : 8Mbit
jump to run user1

s렫l읗?
ready

[ESP_Faye]

Hi,

Please have a try with our latest AT firmware http://bbs.espressif.com/viewtopic.php?f=46&p=6508#p6508.
It is suggest that using the new boot_v1.5.bin instead of boot_v1.2.bin.

If your problem is still unsolved, please provide the new test log for debugging.

Thanks for your interest in ESP8266 !